TSP x Wunderladen Racing Oil Pan Baffle for 2022+ Honda Civic 1.5T

Wunderladen RacingSKU: WRCXIOPB

Earn [points_amount] TSP Rewards points when you buy this item.

Price:
Sale price$150.00

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Description

Our pan baffle only fits USDM oil pans, European and Asian model cars have an oil level sensor which interferes with our baffle.

Wunderladen Racing teamed up with Two Step Performance to create an oil pan baffle  on par with our 10th gen baffle, but for the 11th gen Civic folks! Our oil pan baffle is the perfect solution for keeping your oil pickup tube surrounded by oil, this means higher oil pressure during hard turning. From the factory there is nothing in the pan to control oil flow in the sump, so we knew we had to change that!

Our baffle replaces the factory windage tray and features 5 one-way oil control flaps (2 on one side and 3 on the other) that allow oil to flow towards the pickup tube but not away from it. With a precise fit to the pan there is minimal room for oil to flow around the baffle which keeps as much oil as possible near the pickup during driving but still allows oil to drain from the pan without any hinderance. Our baffle also acts as an improved windage tray which helps to cut down the amount of air that gets stuck in the oil which further helps keep oil pressure stable.

Our baffle provides the following improvements:

  • Higher oil pressure during hard cornering
  • Decreased oil aeration from the rotating assembly

To install our oil pan baffle the factory rivets must be removed and the pan drilled and tapped for M6x1.0 bolts. It comes with everything needed to install into your pan other than a drill bit, thread tap (5mm drill bit needed), and RTV to seal the pan to the block. 

NOTE: We strongly recommend test fitting the pan with the baffle without sealant and rotating the crank by hand to ensure the crankshaft does not contact the baffle before doing a final install. We have not had this issue present itself, but the crank does run very close to the baffle. Be sure to clean pan, baffle and block mating surface of any oil, foreign material or drill shavings before reinstalling the pan. RTV requires clean, oil free surfaces to cure correctly and form a leak free seal.

TSP Rewards

Purchase this product and earn $3.00 towards your next purchase!

You may also like

Recently viewed